S5 CP143 SINEC software ? - PLCS.net

antoine · November 9th, 2009, 10:04 AM

Hello,

We have an S5 PLC with SINEC ISO/OSI communication boards 6GK1143-OAOB1 (CP143)

I need to go online but my brand new console has only the NCM software V2.07 which I use with the "new" generation of CP1430 TCP/IP

As soon as my old PG710 passed out last year, I am kind of stuck !

Does someone have the old NCM software or any useful link ?

Any other way to go online ?

Thx

Antoine

krk · November 9th, 2009, 02:10 PM

Found this archived away, it contains some old COM packages from around 1991:

COM143 V1.1

Also:
STF-DB Editor V1.1
PG-LOAD V1.2
COM-EPROM V1.81

krk · November 9th, 2009, 02:45 PM

I also found this:

SINEC NCM V1.01

but this was for the CP5430

It's too big to upload here but if you want to give it a go drop me a PM and I'll get it to you somehow.

**edit**
Ooops - that's a L2 module

The only other SINEC NCM for a H1 module I have is:

SINEC NCM V5.01

from around 1995 which is for the CP1430

antoine · November 10th, 2009, 03:56 PM

Hi,

Thanks a lot krk, the NCM143 works just fine.
Topic closed !

See ya

umair2282 · July 12th, 2010, 08:02 AM

Quote:

Originally Posted by antoine

Hi,

Thanks a lot krk, the NCM143 works just fine.
Topic closed !

See ya

DID any body have the manual For CP 143 confguration through COm 143 software.

brendan.buchan · July 1st, 2013, 10:30 PM

Hi guys,

Bit of a grave dig, but just wondering if anyone has a copy of SINEC NCM V1.01/COM5430TF?

Need to change some parameters in an old CP5430 card in a S5-115U rack.

krk · July 2nd, 2013, 12:34 AM

Here you go.

brendan.buchan · July 2nd, 2013, 12:51 AM

Thank you very much krk! Very helpful.

JeanPuik · December 5th, 2013, 12:05 PM

Hello there,
I'm looking for the 1.04 version of NCM in order to configure a CP1430TF.
A huge thanks for your help !
Regards,
Jean

hChuck · January 29th, 2014, 06:57 AM

Greetings, guys.

I'm looking for Sinec NCM for CP5431.
Can you help me out?
I don't even know where to look.
Google led me here. I've downloaded V1.1 krk uploaded, but it supports only CP5430.

I'd appreciate any help.
Thanks in advance.
~Chuck

krk · January 30th, 2014, 09:35 AM

Try this.

(Not sure what's in here as I haven't used it for many years)

hChuck · January 30th, 2014, 09:51 AM

Thanks.
I'll give it a try as soon as I can.

DOMINGOFER · January 1st, 2015, 11:47 PM

The only other SINEC NCM for a H1 module I have is:

SINEC NCM V5.01

from around 1995 which is for the CP1430

CAN YOU PROVIDE IT?

krk · January 2nd, 2015, 07:50 AM

Quote:

Originally Posted by DOMINGOFER

CAN YOU PROVIDE IT?

Here you go....

DOMINGOFER · January 8th, 2015, 05:43 AM

Thank you for the software,

i have already installed and it looks ok.

I have no idea about simatic s5, i know about s7.

Imaging, it is s7, how to define this new card cp1430 in the hardware configuration??

How to do it in s5?

Can you advice?

Thank you

November 9th, 2009, 10:04 AM	#1
antoine Member Join Date: Sep 2002 Posts: 62	S5 CP143 SINEC software ? Hello, We have an S5 PLC with SINEC ISO/OSI communication boards 6GK1143-OAOB1 (CP143) I need to go online but my brand new console has only the NCM software V2.07 which I use with the "new" generation of CP1430 TCP/IP As soon as my old PG710 passed out last year, I am kind of stuck ! Does someone have the old NCM software or any useful link ? Any other way to go online ? Thx Antoine

November 9th, 2009, 02:45 PM	#3
krk Lifetime Supporting Member Join Date: Aug 2004 Location: Kent Posts: 795	I also found this: SINEC NCM V1.01 but this was for the CP5430 It's too big to upload here but if you want to give it a go drop me a PM and I'll get it to you somehow. edit Ooops - that's a L2 module The only other SINEC NCM for a H1 module I have is: SINEC NCM V5.01 from around 1995 which is for the CP1430 Last edited by krk; November 9th, 2009 at 02:53 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Topics
Thread	Thread Starter	Forum	Replies	Last Post
RSI developing software	BobB	LIVE PLC Questions And Answers	16	May 21st, 2010 04:52 PM
S5 Programming Software	n.navaneethan	LIVE PLC Questions And Answers	3	August 22nd, 2009 03:06 AM
Siemens S5 PG software installation	bdvsia	LIVE PLC Questions And Answers	3	March 5th, 2009 03:13 PM
Looking for PG 95 Software for Siemens S5	Redland Brick	LIVE PLC Questions And Answers	1	March 24th, 2005 07:51 PM
Siemens S5 Programming Software	PhoenixZA	LIVE PLC Questions And Answers	3	March 11th, 2005 01:49 PM



This board is for PLC Related Q&A ONLY. Please DON'T use it for advertising, etc.
*Try our online PLC Simulator- FREE. Click here now to try it.*

November 10th, 2009, 03:56 PM	#4
antoine Member Join Date: Sep 2002 Posts: 62	Hi, Thanks a lot krk, the NCM143 works just fine. Topic closed ! See ya

July 1st, 2013, 10:30 PM	#6
brendan.buchan Member Join Date: May 2010 Location: Melbourne Posts: 451	Hi guys, Bit of a grave dig, but just wondering if anyone has a copy of SINEC NCM V1.01/COM5430TF? Need to change some parameters in an old CP5430 card in a S5-115U rack.

July 2nd, 2013, 12:51 AM	#8
brendan.buchan Member Join Date: May 2010 Location: Melbourne Posts: 451	Thank you very much krk! Very helpful.

December 5th, 2013, 12:05 PM	#9
JeanPuik Member Join Date: Dec 2013 Location: UyA Posts: 1	Hello there, I'm looking for the 1.04 version of NCM in order to configure a CP1430TF. A huge thanks for your help ! Regards, Jean

January 29th, 2014, 06:57 AM	#10
hChuck Member Join Date: Jan 2014 Location: Zagreb Posts: 3	Greetings, guys. I'm looking for Sinec NCM for CP5431. Can you help me out? I don't even know where to look. Google led me here. I've downloaded V1.1 krk uploaded, but it supports only CP5430. I'd appreciate any help. Thanks in advance. ~Chuck

January 30th, 2014, 09:51 AM	#12
hChuck Member Join Date: Jan 2014 Location: Zagreb Posts: 3	Thanks. I'll give it a try as soon as I can.

January 1st, 2015, 11:47 PM	#13
DOMINGOFER Member Join Date: Dec 2014 Location: SPAIN Posts: 4	The only other SINEC NCM for a H1 module I have is: SINEC NCM V5.01 from around 1995 which is for the CP1430 CAN YOU PROVIDE IT?

January 8th, 2015, 05:43 AM	#15
DOMINGOFER Member Join Date: Dec 2014 Location: SPAIN Posts: 4	Thank you for the software, i have already installed and it looks ok. I have no idea about simatic s5, i know about s7. Imaging, it is s7, how to define this new card cp1430 in the hardware configuration?? How to do it in s5? Can you advice? Thank you

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)