How to connect iFIX to an SLC500 PLC? - PLCS.net

ruby.n · March 18th, 2010, 08:34 AM

Hi have iFIX installed on my machine. I have an IGS driver configuration file. How do I get iFIX to talk to my PLC? I also have RSLinx installed...

thomassorensen · March 21st, 2010, 10:42 AM

Have you installed the IGS driver ?

ruby.n · March 25th, 2010, 10:38 AM

Hi there...

I had installed an ABR7 driver, but it came up with an error 'API not initialized'

So I have now switched to using an IGS driver...

Thanks so much though...

thomassorensen · March 29th, 2010, 01:57 AM

If you have installed the IGS driver (And have the IGS driver option in your license key). what is your question ?

Do you want to know how to configure a iFIX Driver ?

March 18th, 2010, 08:34 AM	#1
ruby.n Member Join Date: Dec 2009 Location: USA Posts: 48	How to connect iFIX to an SLC500 PLC? Hi have iFIX installed on my machine. I have an IGS driver configuration file. How do I get iFIX to talk to my PLC? I also have RSLinx installed...

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Topics
Thread	Thread Starter	Forum	Replies	Last Post
ifix using si7 with siemens plc	qikuidg	LIVE PLC Questions And Answers	0	May 13th, 2009 06:18 AM
Connect humidity sensor to a PLC	el_b	LIVE PLC Questions And Answers	9	March 16th, 2009 04:42 AM
how to connect to a plc using ethernet/ip connection?	vlad.rja	LIVE PLC Questions And Answers	6	February 2nd, 2009 07:48 AM
how to make a technical support be able to connect to plc simatic s7-300 by internet	potato	LIVE PLC Questions And Answers	5	November 13th, 2008 08:45 AM
how to connect a PLC to an optocoupler	Sean Vyar	LIVE PLC Questions And Answers	1	April 5th, 2004 10:52 AM



This board is for PLC Related Q&A ONLY. Please DON'T use it for advertising, etc.
*Try our online PLC Simulator- FREE. Click here now to try it.* ---------->>>>>Get FREE PLC Programming Tips

March 21st, 2010, 10:42 AM	#2
thomassorensen Member Join Date: Oct 2008 Location: Copenhagen Posts: 14	Have you installed the IGS driver ?

March 25th, 2010, 10:38 AM	#3
ruby.n Member Join Date: Dec 2009 Location: USA Posts: 48	Hi there... I had installed an ABR7 driver, but it came up with an error 'API not initialized' So I have now switched to using an IGS driver... Thanks so much though...

March 29th, 2010, 01:57 AM	#4
thomassorensen Member Join Date: Oct 2008 Location: Copenhagen Posts: 14	If you have installed the IGS driver (And have the IGS driver option in your license key). what is your question ? Do you want to know how to configure a iFIX Driver ?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)