GE Fanuc series one junior - PLCS.net

Stephen_hopper · March 30th, 2010, 03:00 PM

dose anyone have any info on a GE Fanuc Series One Junior, I have one that will only run in Hand and not in Auto I would like to go on line and see what the conditions are for Auto. I do not have the software or cabe for it... Any information on finding them would be great thanks

PLCRookie · March 30th, 2010, 03:13 PM

There is a hand help programming unit that attaches to the face of the controller. You can use that to manually write the program to paper.

You can also transfer programs with a tape recorder, and cable.

You can try PLCCenter .com or ebay for the handheld and cable.

AND..............WELCOME TO THE FORUM!

Stephen_hopper · March 30th, 2010, 03:17 PM

thanks very much

PLCRookie · March 30th, 2010, 03:19 PM

I have a manual here for the programmer, but I do not have an electronic copy. I'll see if i can find one for you. This controller was also sold by Siemens.

PLCRookie · March 30th, 2010, 03:22 PM

Try Here.
http://www.pdfsupply.com/automation/...c610/GEK-90503

The manual I have is GEK-90503.
I have lots of these programmers laying around. PM me if you are interested in one.

Stephen_hopper · March 30th, 2010, 03:25 PM

I found an electronic copy of the programming guide for it.

March 30th, 2010, 03:00 PM	#1
Stephen_hopper Member Join Date: Mar 2010 Location: Milton Posts: 3	GE Fanuc series one junior dose anyone have any info on a GE Fanuc Series One Junior, I have one that will only run in Hand and not in Auto I would like to go on line and see what the conditions are for Auto. I do not have the software or cabe for it... Any information on finding them would be great thanks

March 30th, 2010, 03:13 PM	#2
PLCRookie Member Join Date: Dec 2005 Location: Right here Posts: 299	There is a hand help programming unit that attaches to the face of the controller. You can use that to manually write the program to paper. You can also transfer programs with a tape recorder, and cable. You can try PLCCenter .com or ebay for the handheld and cable. AND..............WELCOME TO THE FORUM! __________________ "Quality, Delivery, Price..........Choose two."

March 30th, 2010, 03:19 PM	#4
PLCRookie Member Join Date: Dec 2005 Location: Right here Posts: 299	I have a manual here for the programmer, but I do not have an electronic copy. I'll see if i can find one for you. This controller was also sold by Siemens. __________________ "Quality, Delivery, Price..........Choose two."

March 30th, 2010, 03:22 PM	#5
PLCRookie Member Join Date: Dec 2005 Location: Right here Posts: 299	Try Here. http://www.pdfsupply.com/automation/...c610/GEK-90503 The manual I have is GEK-90503. I have lots of these programmers laying around. PM me if you are interested in one. __________________ "Quality, Delivery, Price..........Choose two."

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



This board is for PLC Related Q&A ONLY. Please DON'T use it for advertising, etc.
*Try our online PLC Simulator- FREE. Click here now to try it.* ---------->>>>>Get FREE PLC Programming Tips

March 30th, 2010, 03:17 PM	#3
Stephen_hopper Member Join Date: Mar 2010 Location: Milton Posts: 3	thanks very much

March 30th, 2010, 03:25 PM	#6
Stephen_hopper Member Join Date: Mar 2010 Location: Milton Posts: 3	I found an electronic copy of the programming guide for it.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Topics
Thread	Thread Starter	Forum	Replies	Last Post
GE FANUC Series One	Lithoservice	LIVE PLC Questions And Answers	8	October 24th, 2007 06:39 PM
GE Fanuc Series 3 Instructions	GAGENG	LIVE PLC Questions And Answers	2	March 6th, 2006 07:45 AM
GE Fanuc Series one	Amiko_Phil	LIVE PLC Questions And Answers	2	January 19th, 2006 10:05 AM
GE Fanuc series one and plus	atatari	LIVE PLC Questions And Answers	1	April 28th, 2003 02:08 PM