Nematron PV1040 to Mitsubishi AJ71 (RS232) card connections - PLCS.net

Steak · October 29th, 2003, 07:11 AM

Anyone have a cable pin out diagram to connect the Nematron PowerView touch screen via the RS232 port on a Mitsubishi AJ71UC24 card. I can connect it via the programming port on the Mits CPU but do not want to tie up the port. Nematron in Michigan is looking into it, they did not have any immediate solution(PDF).

Thanks anyone

Pierre · October 29th, 2003, 11:35 AM

Quote:

Originally posted by Steak
...connect ... touch screen ... RS232 port on a Mitsubishi AJ71UC24 card. I can connect it via the programming port ...

Be sure that they have the C24 driver. I doubt it's the same as the CPU prog. port com driver.

Steak · October 29th, 2003, 12:27 PM

The Nematron software has a driver called AJ71 but I'm not sure if it can communicate via 232. The manual has wiring information for 422 but would rather use 232.

Steak

Pierre · October 29th, 2003, 10:44 PM

Unless they have a proven driver/device setup which has already been wroking elsewhere, I would not trust Nematron to any Mitsubishi "new" setup.

Go for the 422.

October 29th, 2003, 07:11 AM	#1
Steak Member Join Date: May 2003 Posts: 3	Nematron PV1040 to Mitsubishi AJ71 (RS232) card connections Anyone have a cable pin out diagram to connect the Nematron PowerView touch screen via the RS232 port on a Mitsubishi AJ71UC24 card. I can connect it via the programming port on the Mits CPU but do not want to tie up the port. Nematron in Michigan is looking into it, they did not have any immediate solution(PDF). Thanks anyone

October 29th, 2003, 10:44 PM	#4
Pierre Lifetime Supporting Member Join Date: Apr 2002 Location: Montreal Posts: 1,663	Unless they have a proven driver/device setup which has already been wroking elsewhere, I would not trust Nematron to any Mitsubishi "new" setup. Go for the 422. __________________ If it looks like a Cat...

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Topics
Thread	Thread Starter	Forum	Replies	Last Post
RS232 Mitsubishi to a Printer	Coopiniho	LIVE PLC Questions And Answers	5	May 25th, 2005 09:52 AM
1784-PCMK/B Card Health	msinclair	LIVE PLC Questions And Answers	6	August 13th, 2004 09:19 AM
Mitsubishi series A, usb to rs232 converter	exazier	LIVE PLC Questions And Answers	2	March 18th, 2004 01:19 PM



This board is for PLC Related Q&A ONLY. Please DON'T use it for advertising, etc.
*Try our online PLC Simulator- FREE. Click here now to try it.* ---------->>>>>Get FREE PLC Programming Tips

October 29th, 2003, 12:27 PM	#3
Steak Member Join Date: May 2003 Posts: 3	The Nematron software has a driver called AJ71 but I'm not sure if it can communicate via 232. The manual has wiring information for 422 but would rather use 232. Steak

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)