ge fanuc run led - PLCS.net

basharath · October 10th, 2010, 02:19 AM

dear all
the plant has started after a long time and the gefanuc 28pt micro plc is not showing run led.
what can be the problems and how to solve them.

RussB · October 11th, 2010, 10:15 AM

It is most likely that this unit has been installed without a battery on the RAM, or the battery is dead. If you are lucky the program will be available in backup form on the installed CPU's Flash memory or in the files on a CD or USB drive.

basharath · October 12th, 2010, 12:19 AM

dear russ u r 100% r8,yesterday i went to site and found there was no logic in the plc...thanks i have kept its backup with me....

what i thought was might be some outputs are not working...but it was as u said..this is where the experience works.

October 10th, 2010, 02:19 AM	#1
basharath Member Join Date: Mar 2010 Location: hyderabad Posts: 71	ge fanuc run led dear all the plant has started after a long time and the gefanuc 28pt micro plc is not showing run led. what can be the problems and how to solve them. __________________ "My choice of prophet muhammad(pbuh) to lead the list of most influential persons in history may surprise some and might be questioned by others but he was the only man successfull on both religious and secular levels."MICHEAL H.HART,THE 100 MOST INFLUENTIAL PERSONS IN HISTORY.

October 11th, 2010, 10:15 AM	#2
RussB Lifetime Supporting Member Join Date: Oct 2003 Location: Michigan Posts: 1,627	It is most likely that this unit has been installed without a battery on the RAM, or the battery is dead. If you are lucky the program will be available in backup form on the installed CPU's Flash memory or in the files on a CD or USB drive. __________________ LEARN something today so you can TEACH something tomorrow. DETAIL in your question promotes DETAIL in my answer. Do you "Believe"? Do you vote? Please Read: Dominus Vobiscum <))>(

October 12th, 2010, 12:19 AM	#3
basharath Member Join Date: Mar 2010 Location: hyderabad Posts: 71	dear russ u r 100% r8,yesterday i went to site and found there was no logic in the plc...thanks i have kept its backup with me.... what i thought was might be some outputs are not working...but it was as u said..this is where the experience works. __________________ "My choice of prophet muhammad(pbuh) to lead the list of most influential persons in history may surprise some and might be questioned by others but he was the only man successfull on both religious and secular levels."MICHEAL H.HART,THE 100 MOST INFLUENTIAL PERSONS IN HISTORY.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Topics
Thread	Thread Starter	Forum	Replies	Last Post
GE Fanuc CPU 331	gallegos1968	LIVE PLC Questions And Answers	11	July 3rd, 2010 01:54 AM
GE Fanuc Nano Serial Communication?	madmanex	LIVE PLC Questions And Answers	1	March 25th, 2005 05:24 PM
GE Fanuc 90-30	GMc	LIVE PLC Questions And Answers	15	February 3rd, 2005 04:43 AM
GE Fanuc T/W Interface I/O help needed	Johnny T	LIVE PLC Questions And Answers	4	June 28th, 2004 02:26 AM
GE Fanuc HMI Development	Phil Bugg	LIVE PLC Questions And Answers	2	December 11th, 2003 09:58 AM



This board is for PLC Related Q&A ONLY. Please DON'T use it for advertising, etc.
*Try our online PLC Simulator- FREE. Click here now to try it.* ---------->>>>>Get FREE PLC Programming Tips

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)