This board is for PLC Related Q&A ONLY. Please DON'T use it for advertising, etc.
|Try our online
PLC Simulator- FREE.
Click here now to try it.
New Here? Please read this important info!!!
|February 18th, 2011, 07:21 AM||#1|
I am looking at upgrading a large process line that has just short of 5K I/O. Currently there are 7 PLC 5/60 that run this line with the bulk of the I/O on RIO.
This will be a total tear out and replace I/O field wiring and everything. Looking to go back with Control/ Guard Logix system,PF 755 Drives with safe off and speed/ FT View Distributed HMI,Point I/O.
The I/O Will be reduced by about 1/3. Is there a way to have a point i/o rack with some modules mastered by a L7 processor in the chasis and safety I/O modules in this same point I/O rack that are mastered by a seperate Guard Logix Processor in the chasis?
I would think so? I am looking at the L7 so i can use less processors. Maybe just 1. 500 max connections vs 250.
I would like to handle just safety stuff with the guardlogix and everything else with the L7. But the point I/O racks will be mixed with standard and safty I/O.
|Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)|
|Thread||Thread Starter||Forum||Replies||Last Post|
|Schneider Concept question||Steve Bailey||LIVE PLC Questions And Answers||18||April 19th, 2010 10:59 AM|
|Concept M||Mic||LIVE PLC Questions And Answers||4||December 20th, 2005 02:06 AM|
|Concept Ver2.5 Trouble||Engineer1||LIVE PLC Questions And Answers||1||February 4th, 2005 09:39 AM|
|Modicon COncept PID blocks||jimdi4||LIVE PLC Questions And Answers||2||October 20th, 2004 01:30 PM|
|MODICON Concept Question||jimdi4||LIVE PLC Questions And Answers||5||August 31st, 2004 02:20 PM|