PV+700-micrologix 1500 comms wiring diagram - PLCS.net

robw53 · June 7th, 2011, 09:36 AM

i am having to replace an old hakko HMI with a PV+700 and the original cable was a 25pin male from the screen to 9pin female back to the 1500, i am wanting to make a converter to get to the right pin configuration and to take it from a 25pin to 9pin at the HMI end, but cannot find one on the net, the run is about 15m and i crnt get a cable long enough to do the job which would be a 2711-NC14 style, can anyone help me?

Rob

the screen went down before it was due to be upgraded and i havent got the Net ENI setup yet, does anyone have any micrologix 1500 comms setup parameters that are proven? i have set them up in the past and they didnt require any alterations on the PLC but this one won't connect and im guessing there is something wrong with the setup in the processor

Ken Roach · June 7th, 2011, 11:28 AM

The MicroLogix 1500 serial port defaults are DF1 Full Duplex protocol, 19200 baud, 8/N/1 framing, CRC error checking, no handshaking.

MicroLogix and SLC serial ports are always DTE type, and PanelView Plus serial ports are DCE type. This means you need to run a straight-through serial cable: 2-2, 3-3, 5-5.

robw53 · June 7th, 2011, 02:20 PM

cheers ken thats just the information i was after

Rob

June 7th, 2011, 09:36 AM	#1
robw53 Member Join Date: Nov 2009 Location: south yorks Posts: 444	PV+700-micrologix 1500 comms wiring diagram i am having to replace an old hakko HMI with a PV+700 and the original cable was a 25pin male from the screen to 9pin female back to the 1500, i am wanting to make a converter to get to the right pin configuration and to take it from a 25pin to 9pin at the HMI end, but cannot find one on the net, the run is about 15m and i crnt get a cable long enough to do the job which would be a 2711-NC14 style, can anyone help me? Rob the screen went down before it was due to be upgraded and i havent got the Net ENI setup yet, does anyone have any micrologix 1500 comms setup parameters that are proven? i have set them up in the past and they didnt require any alterations on the PLC but this one won't connect and im guessing there is something wrong with the setup in the processor __________________ "so far as is reasonably practicable” "not everything that can be counted counts and not everthing that counts can be counted" Albert Einstein Flex those I/O's

June 7th, 2011, 02:20 PM	#3
robw53 Member Join Date: Nov 2009 Location: south yorks Posts: 444	cheers ken thats just the information i was after Rob __________________ "so far as is reasonably practicable” "not everything that can be counted counts and not everthing that counts can be counted" Albert Einstein Flex those I/O's

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Topics
Thread	Thread Starter	Forum	Replies	Last Post
NET-ENI & Micrologix 1500 Unrecognized Device	ElectricD	LIVE PLC Questions And Answers	9	November 2nd, 2012 02:42 PM
Downloading to a MicroLogix 1500	SSO	LIVE PLC Questions And Answers	6	May 1st, 2008 04:51 PM
Micrologix 1500 Connection	Phillip Buchanan	LIVE PLC Questions And Answers	1	August 1st, 2007 01:30 PM
Newb - working with MicroLogix 1500 and Modicon Quantum PLC	work_term_guy	LIVE PLC Questions And Answers	2	May 17th, 2007 09:15 PM
Micrologix 1500 wiring examples	Dan Stacy	LIVE PLC Questions And Answers	1	June 29th, 2003 02:26 AM



This board is for PLC Related Q&A ONLY. Please DON'T use it for advertising, etc.
*Try our online PLC Simulator- FREE. Click here now to try it.* ---------->>>>>Get FREE PLC Programming Tips

June 7th, 2011, 11:28 AM	#2
Ken Roach Lifetime Supporting Member + Moderator Join Date: Apr 2002 Location: Seattle, WA Posts: 8,583	The MicroLogix 1500 serial port defaults are DF1 Full Duplex protocol, 19200 baud, 8/N/1 framing, CRC error checking, no handshaking. MicroLogix and SLC serial ports are always DTE type, and PanelView Plus serial ports are DCE type. This means you need to run a straight-through serial cable: 2-2, 3-3, 5-5.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)