Foxboro Deploymet Issues in Archestra - PLCS.net

TridentAutomation · October 28th, 2011, 02:20 PM

I am trying to deploy a ROUT block in Archestra. When the deployment is completed it shows that the process has taken place in Archestra however the Wonderware view select utility still shows undeployed. we have tried using a different controller, different compound, rebooting the workstation, deployed without FBM connection and still nothing. Does anyone have any other suggestions?

Oakley · October 28th, 2011, 04:02 PM

Did you make changes to your ROUT block? If so, did it include any graphic changes?

What does the indicator show on your InTouch? Is it the indicator that indicates that the InTouch application needs to be re-deployed?

TridentAutomation · October 31st, 2011, 08:33 AM

Oakley,

It turnes out that the input was connected to the output of the ROUT block. With most other DCS systems one is not able to preform this operation. I'm glad it was an easy fix.

Thank you for your suggestion!

October 28th, 2011, 02:20 PM	#1
TridentAutomation Member Join Date: Jun 2010 Location: Appleton Posts: 8	Foxboro Deploymet Issues in Archestra I am trying to deploy a ROUT block in Archestra. When the deployment is completed it shows that the process has taken place in Archestra however the Wonderware view select utility still shows undeployed. we have tried using a different controller, different compound, rebooting the workstation, deployed without FBM connection and still nothing. Does anyone have any other suggestions?

October 28th, 2011, 04:02 PM	#2
Oakley Member Join Date: Oct 2004 Posts: 1,055	Did you make changes to your ROUT block? If so, did it include any graphic changes? What does the indicator show on your InTouch? Is it the indicator that indicates that the InTouch application needs to be re-deployed? __________________ Artificial intelligence never overcomes natural stupidity.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Topics
Thread	Thread Starter	Forum	Replies	Last Post
Newbie PLC data bit Issues	shiggins0111	LIVE PLC Questions And Answers	4	May 17th, 2011 02:43 PM
WinCC 2008 Flexible issues	JOLTRON	LIVE PLC Questions And Answers	3	March 25th, 2009 05:45 PM
Mitsubishi FX issues... programming	geniusintraining	LIVE PLC Questions And Answers	12	February 18th, 2009 12:08 PM
Panelview plus 1250 colour issues	vk_bt1	LIVE PLC Questions And Answers	4	December 7th, 2008 03:52 PM
Servo Drive EMC Issues...	Brian Hamilton	LIVE PLC Questions And Answers	0	April 12th, 2008 04:04 PM



This board is for PLC Related Q&A ONLY. Please DON'T use it for advertising, etc.
*Try our online PLC Simulator- FREE. Click here now to try it.* ---------->>>>>Get FREE PLC Programming Tips

October 31st, 2011, 08:33 AM	#3
TridentAutomation Member Join Date: Jun 2010 Location: Appleton Posts: 8	Oakley, It turnes out that the input was connected to the output of the ROUT block. With most other DCS systems one is not able to preform this operation. I'm glad it was an easy fix. Thank you for your suggestion!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)