Replacing a 1794-ACN15 for a 1794-ACNR15 - PLCS.net

RodV · July 3rd, 2012, 09:30 PM

I need to replace a broken 1794-ACN15 FlexI/O Controlnet adapter and I can only get a 1794-ACNR15 which is a redundant one. Can I do this replacement and only use one connector of the two available in the module?

Thanks

Rod

Ken Roach · July 4th, 2012, 12:15 AM

Yes.

A 1794-ACNR15 with only Channel A connected is functionally identical to a single-channel 1794-ACN15.

July 3rd, 2012, 09:30 PM	#1
RodV Member Join Date: May 2012 Location: Chillan Posts: 8	Replacing a 1794-ACN15 for a 1794-ACNR15 I need to replace a broken 1794-ACN15 FlexI/O Controlnet adapter and I can only get a 1794-ACNR15 which is a redundant one. Can I do this replacement and only use one connector of the two available in the module? Thanks Rod

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Topics
Thread	Thread Starter	Forum	Replies	Last Post
1794 ACN15 Flex I/O Adaptor Revision number update	Bradley Schulz	LIVE PLC Questions And Answers	0	May 27th, 2012 05:39 PM



This board is for PLC Related Q&A ONLY. Please DON'T use it for advertising, etc.
*Try our online PLC Simulator- FREE. Click here now to try it.* ---------->>>>>Get FREE PLC Programming Tips

July 4th, 2012, 12:15 AM	#2
Ken Roach Lifetime Supporting Member + Moderator Join Date: Apr 2002 Location: Seattle, WA Posts: 8,573	Yes. A 1794-ACNR15 with only Channel A connected is functionally identical to a single-channel 1794-ACN15.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)