Communicating between my PLC and my PC

urk

Member
U
Join Date
Mar 2004
Posts
6
Hello.

I've got an Siemens S7-300, and I would like to develop an application on my PC to read from their DB's and other outputs.

I've got some questions:

1) I've got Prodave v5.5. Is it right to perform the application? Which version of Visual Basic do I need?

2) Could I work with Prodave and PLCSIM at the same time?

3) What is WinCC?

Thank you very much. Regards.
 

Similar Topics

F
Communicating between 1761-AIC, PLC and PC
I have 4- Micro1200 Controllers, connected via 1761-AIC interface. All these are connected via a DH485 communication. The final 1761-AIC is...
Replies
5
Views
4,471
Mickey
Mickey
P
Communicating between 1769-L35/B to PV plus 1250
"First time caller, long time listener here" I am changing the PLC in a machine from a L33 to my L35E. (I need the L33 out of it.) I have my...
Replies
4
Views
1,548
polana01
P
T
Issues Communicating between Crimson 3.0 to G315
Hello all, I seem to repeatedly run into troubles downloading from Crimson 3.0 into a G315 HMI. Before the holidays, things seemed to work...
Replies
0
Views
1,209
TimC114
T
J
communicating between contrologix and d2-250-1
I want to control a pump using a d2-250-1 plc from automation direct. The output to run the pump will come from this processor. The pump is...
Replies
3
Views
1,613
widelto
widelto
Y
Communicating between a SLC 5/04 and a PV+ 600
I am trying to communicate my SLC 5/04 PLC with a Panelview plus 600 touchscreen. I have created the programs for both devices but cannot get the...
Replies
4
Views
2,746
valdi
V
Back
Top Bottom