Connected Components Workbench - ANOTHER Rockwell "Pie in the sky" - PLCS.net

BITS N BYTES · March 19th, 2013, 05:36 PM

Installed and tested this new software for the 800 series "brick" PLC's. What a totally confusing and non-user friendly GUI. Am i missing something here? Any feedback from users would be most appreciated. I find it clunky, slow and NON-intuitive! Hardware cost is very low cost but struggling with the CCW programming software will quickly eat up the extra cost of development. Please share experience god/bad with the 800 series processors and CCW software.

dmargineau · March 19th, 2013, 05:53 PM

That's the RA answer to the Siemens' TIA platform...

Have you previously worked with Siemens Step7?
Probably not, since I find plenty of "similarities" between the CCW and any late Siemens software platform...Is it just me?!

March 19th, 2013, 05:36 PM	#1
BITS N BYTES Lifetime Supporting Member Join Date: Jun 2005 Location: Miami Beach Posts: 401	Connected Components Workbench - ANOTHER Rockwell "Pie in the sky" Installed and tested this new software for the 800 series "brick" PLC's. What a totally confusing and non-user friendly GUI. Am i missing something here? Any feedback from users would be most appreciated. I find it clunky, slow and NON-intuitive! Hardware cost is very low cost but struggling with the CCW programming software will quickly eat up the extra cost of development. Please share experience god/bad with the 800 series processors and CCW software.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Topics
Thread	Thread Starter	Forum	Replies	Last Post
AB Micro800 and Connected Components Workbench programming question	PLCDontUQuitOnMe	LIVE PLC Questions And Answers	16	April 26th, 2017 06:02 PM
Connected Components Workbench	MarkNightingale	LIVE PLC Questions And Answers	19	October 3rd, 2016 09:02 PM
Rockwell Components deliveries	curlyandshemp	LIVE PLC Questions And Answers	7	February 21st, 2010 11:43 AM
Rockwell Allen Bradley Programming Software, RSLogix 5, RSLogix 500, RS Linx, RSLogix	vvcd	LIVE PLC Questions And Answers	21	September 24th, 2009 10:04 PM
Rockwell Activation Components Explained	aiki202	LIVE PLC Questions And Answers	12	October 31st, 2008 01:06 AM



This board is for PLC Related Q&A ONLY. Please DON'T use it for advertising, etc.
*Try our online PLC Simulator- FREE. Click here now to try it.* ---------->>>>>Get FREE PLC Programming Tips

March 19th, 2013, 05:53 PM	#2
dmargineau Lifetime Supporting Member Join Date: Dec 2011 Location: Midwest Posts: 2,385	That's the RA answer to the Siemens' TIA platform... Have you previously worked with Siemens Step7? Probably not, since I find plenty of "similarities" between the CCW and any late Siemens software platform...Is it just me?!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)