bononn
Member
This is related to an earlier thread about programming a Keyence Visual KV-16 PLC.
My program has two parts:
1. it turns a test fixture on, and shuts it off when various limit switches change state. I think I have this started, but I'd like to have each limit switch turn on a different indicator light in addition to shutting down the fixture.
2. it compares an input side cycle count to an output side count, and shuts down if there are too few output counts. The target output count needs to be adjustable. I located a TMIN function in the manual, but don't know how to link this to the rest of the program.
I'm attaching a brief summary of what I've got and what I'm trying to do. Can anyone help?
[I think the Keyence manuals are available on-line, or I can upload them if necessary.]
Bo
My program has two parts:
1. it turns a test fixture on, and shuts it off when various limit switches change state. I think I have this started, but I'd like to have each limit switch turn on a different indicator light in addition to shutting down the fixture.
2. it compares an input side cycle count to an output side count, and shuts down if there are too few output counts. The target output count needs to be adjustable. I located a TMIN function in the manual, but don't know how to link this to the rest of the program.
I'm attaching a brief summary of what I've got and what I'm trying to do. Can anyone help?
[I think the Keyence manuals are available on-line, or I can upload them if necessary.]
Bo