Allen Bradley 1746-NI4 Analogue IN Card

[francevendee]

Using the 1746-NI4 as 4 Analogue inputs, all channels set to voltage in.

I am presently only going to use Channel 1.

Do I need to link out all other channels accordingly?
I seem to think I saw this on some site, but it does not tell me to do this with the manual supplied with the module.

 

[mgvol]

Yes, jumper INx+, INx-, and ANL COM together on all unused channels. Dont jumper the channels together, just jumper all three terminals together for each unused channel.

 

[francevendee]

Thanks That is what I thought.