Anyone know about Woodhead/ Applicom DA add item string format?

loknong

Member
L
Join Date
Oct 2020
Location
Thailand
Posts
2
Hello expert

I have migrate legacy project that use Applicom OPC DA with 3rd client and S7-400.

I see in client code add item string call address for example
M_DB1.DBB1_1 I only know DB1.DBB1.
What the meaning of it?
Anyone have keyword or manual for I read about it.

sorry for my bad English

Thanks!! 🤞🏻
 

Similar Topics

R
Can Anyone Identify Where this Code may have come from?
I received an email from a student with the following code attached. This is supposed to control a floodgate system, and supposed to be written...
2
Replies
23
Views
781
drbitboy
drbitboy
EICS
ABB PS501 Control Builder Plus V2.3 Install - anyone use it or know of it
does anyone have an install or know if/where i can download it for the following "ABB PS501 Control Builder Plus V2.3 " the software was a free...
Replies
2
Views
89
ojz0r
O
Bit_Bucket_07
Does anyone recognize these terminals?
They are installed in a control panel that was made in France and are intended for the termination of analog inputs. Each of the red capped...
Replies
4
Views
420
Robb B
R
S
FTV Studio cannot refresh all tags of the controller, can anyone guide me?
Hello everyone, I am currently working on a project that uses a Rockwell L33ER controller and the FTV Studio V13 as Supervisory computer...
Replies
0
Views
131
Shawn_19890604
S
G
Urgent help needed: old Telemecanique/Modicon/Schneider Electric (TSXP5710). Will compensate anyone who can assist!
I have an old PLC (circa 2007) consisting of Telemecanique/Modicon/Schneider Electric devices. The system has developed errors and unfortunately...
Replies
2
Views
236
greekgremlin
G
Back
Top Bottom