Karvon
Member
Hi,
i'm a newbie in PLC world and i'm trying to do project.I have a BX3100 of Beckhoff
and i want to connect a scale through the KL6001 terminal.I made a program based in the COMlibV2.lib which
i found in the site of beckhoff but program doesn't work,although it has no errors or warnings and it runs when i download it in the PLC.
The program's purpose is to raise an output at kl2408 terminal when a string is received,just to see that the PLC communicates with the scale for start.After that i will try to storage the communication somewhere but for now i want to confirm that the scale 'talks' to the PLC.
If someone could help i would be grateful!
I'm posting the code i tried to made.
i'm a newbie in PLC world and i'm trying to do project.I have a BX3100 of Beckhoff
and i want to connect a scale through the KL6001 terminal.I made a program based in the COMlibV2.lib which
i found in the site of beckhoff but program doesn't work,although it has no errors or warnings and it runs when i download it in the PLC.
The program's purpose is to raise an output at kl2408 terminal when a string is received,just to see that the PLC communicates with the scale for start.After that i will try to storage the communication somewhere but for now i want to confirm that the scale 'talks' to the PLC.
If someone could help i would be grateful!
I'm posting the code i tried to made.
