BSL instr
- Thread starter yakub
- Start date
sthompson
Lifetime Supporting Member + Moderator
Welcome to the Forum!
The Length sets the number of Bits that will be Shifted.
The Control does all the tracking and housekeeping for the BSL.
See the Instruction Reference Chapter 9.
http://literature.rockwellautomation.com/idc/groups/literature/documents/rm/1756-rm003_-en-p.pdf
Stu....
Similar Topics
Hi all,
I am trying to convert RSLogix 5000 program to Step7. I need to bit shift left my array of double integers for tracking the product on...
I’m working on a conveyor project for work. We’re trying to install a few diverts to carry product directly to one of two trailer doors. I have...
Hello friends,
When I trigger once for an application, I want to shift the 15th bit in the word address by 10 bit , so;
1000 0000 0000 0000 ->...
Hi everyone, we have a working part rejector already. The issue is the new encoder went from 100ppr to 1024ppr.
Hardware is compactlogix...
Sidenote: One of my favorite lessons back in school was learning about BSL in RSLogix 500, and making it work in a simulator. I've been waiting...