John Morris
Lifetime Supporting Member
Hello all
When I set up the original configuration I filled the first rack with eight modules. So I started a second rack with another eight modules.
In order to get the second rack, i had to choose a comms of some sort to connect the two racks. I choose 1769-AENTR.
But since they are both in the same cabinet, I found the left to right bus expansion cable 1769CRL1
Now how to get rid of the 1769 AENTR module in the config tree.
I am only just slightly OCD enough for this to really bother me.
Your time is appreciated.
Thank you
When I set up the original configuration I filled the first rack with eight modules. So I started a second rack with another eight modules.
In order to get the second rack, i had to choose a comms of some sort to connect the two racks. I choose 1769-AENTR.
But since they are both in the same cabinet, I found the left to right bus expansion cable 1769CRL1
Now how to get rid of the 1769 AENTR module in the config tree.
I am only just slightly OCD enough for this to really bother me.
Your time is appreciated.
Thank you