Hi,
I'm currently doing an upgrade to a press.
The press works with a QuickPanel JR 6" (programmed in QuickDesigner 3.7) and a MicroLogix 1500.
I've both softwares (RSLogix 500 and QuickDesigner 3.7) and the backup of both devices.
I've manage to understand the QuickDesigner, so now I can add screens, buttons, tags, etc., but I'm a little lost regardings how to add this tags on the MicroLogix (well, on the RSLogix 500), because the tags on the QuickDesigner are for example B35/79 or so, and on the RSLogix they are B35:0/1, so how can I state that the tag B35/0 is B35:0/0 or is it done automatically by some sort of procedure I don't know about???
I've searched the previous tags on the programs, and they do have some logic, all tags on the QuickDesigner that are on B9 are on B9 on the RSLogix, but the second digits don't quite matck... B9/54 is B9:3/6 on RSLogix, and I've counted 54 bits on the RSLogix (B9:0/0, B9:0/1 ... till they are 54 bits) and it doesn't match the B9:3/6... (and I've done this on many tags, and I'm sure the programs are OK, I just backed up a few days ago and the press is currently working).
Can anyone help me please??, if you need more info I would gladly give it.
Best Regards
I'm currently doing an upgrade to a press.
The press works with a QuickPanel JR 6" (programmed in QuickDesigner 3.7) and a MicroLogix 1500.
I've both softwares (RSLogix 500 and QuickDesigner 3.7) and the backup of both devices.
I've manage to understand the QuickDesigner, so now I can add screens, buttons, tags, etc., but I'm a little lost regardings how to add this tags on the MicroLogix (well, on the RSLogix 500), because the tags on the QuickDesigner are for example B35/79 or so, and on the RSLogix they are B35:0/1, so how can I state that the tag B35/0 is B35:0/0 or is it done automatically by some sort of procedure I don't know about???
I've searched the previous tags on the programs, and they do have some logic, all tags on the QuickDesigner that are on B9 are on B9 on the RSLogix, but the second digits don't quite matck... B9/54 is B9:3/6 on RSLogix, and I've counted 54 bits on the RSLogix (B9:0/0, B9:0/1 ... till they are 54 bits) and it doesn't match the B9:3/6... (and I've done this on many tags, and I'm sure the programs are OK, I just backed up a few days ago and the press is currently working).
Can anyone help me please??, if you need more info I would gladly give it.
Best Regards