Communicate ABB CI 840 IO Master with Allen Bradley 1756 - L75 PLC

[prakasha]

Hi Guys,
Here I have Started to work on some difficult task I hope I will get some solution here.

I wanted to communicate ABB CI 840 IO Master Module with Allen Bradley 1756-L75 PLC is it possible please If anybody worked on it or knows something about itnlet me know...
Thank you

 

[Jmeadows7676]

The CI 840/a is a Profibus DP Slave so you will need a Gateway. I would use something like an EtherNet I/P to Profibus DB Master Gateway. Prosoft makes one. https://www.prosoft-technology.com/Products/Gateways/PLX5x/PROFIBUS-DP-Master-Slave-to-EtherNet-IP-Modbus-TCP-IP-R-or-Modbus-R-Serial-Gateway

 

[prakasha]

Have you ever worked on this because..?
I have 25 to 30 Profibus nodes which i wish to configure to rockwell PLC. what would you suggest if i go for migration and will it sustain...

Each node will have 10 to 15 IO modules..