Connecting WebNavigator Clients through Router

Piroman

Member
P
Join Date
Apr 2011
Location
Poltava
Posts
6
Hello.
I have a WinCC WebNavigator Server on PC with IP 192.168.1.149 and 20 WebNavigator clients (administration) in 172.20.2.x subnet. I also have a Tp-link router =) How I need to configure that router to let 20 PC's from one network to Server on 192.168.1.149, without reconfiguration any of these 20's connection settings?
I understand that this is an "old question" - may be that's why I could not find answer =(
 

Similar Topics

H
RSLinx Bridge Configuration? Connecting through another PLC
I have 2 PLCs. One is networked to our plant, and the other is networked to the first PLC via a 1756-EN2T. I could easily get the second PLC...
Replies
3
Views
23
dmroeder
dmroeder
T
PLC Delta DVP 12SE and HMI Kinco GL043E not propperly connecting
Good Day to all of you, this is my first post, i will try to explain as best as possible, english is not my natural language. I am performing an...
Replies
0
Views
60
Tecnolaundry
T
J
Connecting a Micrologix 1500 to a PanelView Plus 7
I have been working on this for a while now and I can't seem to get it. I was finally able to view the 1500 on the PanelView under the serial...
Replies
1
Views
100
jscampbell210
J
K
Connecting FactoryTalk Datalog to MariaDB
Hello, I was looking to store some values from our FactoryTalk Application using Datalog to a MariaDB. I see there is quite a bit of documentation...
Replies
1
Views
107
drbitboy
drbitboy
D
Connecting to a PLC through VM Ware
I haven't encountered problems connecting to a PLC through VM Ware but I am with this particular machine. I'm running Windows 7 on a Windows 10...
Replies
8
Views
248
arpus4KM
A
Back
Top Bottom