OkiePC Lifetime Supporting Member Join Date Mar 2005 Location ENE of Nowhere Oklahoma Posts 11,794 Apr 17, 2012 #16 geniusintraining said: Click to expand... That's what we call a BFH.
shawn_75 Member S Join Date Apr 2010 Location KY Posts 432 Apr 17, 2012 #17 I really like this one. http://www.amazon.com/Bosch-PS20-2A-12-Volt-Lithium-Ion-Batteries/dp/B000PI5EBW The clutch works well and the light is also handy as it comes on before the motor starts turning.
I really like this one. http://www.amazon.com/Bosch-PS20-2A-12-Volt-Lithium-Ion-Batteries/dp/B000PI5EBW The clutch works well and the light is also handy as it comes on before the motor starts turning.
fredz0003 Member F Join Date Dec 2010 Location Houston Posts 186 Apr 17, 2012 #18 VJTX said: can anyone recommend a good cordless screwdriver for electrical panel terminals? Click to expand... How did hammers, and sledge hammers (BFH) came to the discussion the op asked for a cordless drill?
VJTX said: can anyone recommend a good cordless screwdriver for electrical panel terminals? Click to expand... How did hammers, and sledge hammers (BFH) came to the discussion the op asked for a cordless drill?
VJTX Member OP V Join Date Oct 2007 Location TEXAS Posts 126 Apr 18, 2012 #19 I think i will purchase the Milwaukee 0490. thanks.
gbradley Lifetime Supporting Member Join Date Apr 2002 Location Corona, Ca. Posts 1,637 Apr 18, 2012 #20 fredz0003 said: How did hammers, and sledge hammers (BFH) came to the discussion the op asked for a cordless drill? Click to expand... Because Ozee's have a good sense of humor. Apparently they need it. ;-)
fredz0003 said: How did hammers, and sledge hammers (BFH) came to the discussion the op asked for a cordless drill? Click to expand... Because Ozee's have a good sense of humor. Apparently they need it. ;-)
VJTX Member OP V Join Date Oct 2007 Location TEXAS Posts 126 Apr 18, 2012 #21 where do you find 3/32 or 2.5mm slotted bits at?
Clay B. Lifetime Supporting Member C Join Date Jun 2005 Location Concord,NC Posts 1,304 Apr 18, 2012 #22 VJTX said: where do you find 3/32 or 2.5mm slotted bits at? Click to expand... We make our own out larger bits. You just turn down the shank and mill a tip. Turning down the shank is required for us since we use Wiedmuller terminal blocks. I have a local machine shop do the work. I give him a dozen larger bits and he makes me a dozen small screwdrivers. I found some the right size once but they were **** so we stick with making our own.
VJTX said: where do you find 3/32 or 2.5mm slotted bits at? Click to expand... We make our own out larger bits. You just turn down the shank and mill a tip. Turning down the shank is required for us since we use Wiedmuller terminal blocks. I have a local machine shop do the work. I give him a dozen larger bits and he makes me a dozen small screwdrivers. I found some the right size once but they were **** so we stick with making our own.
bkottaras Member B Join Date Oct 2005 Location Chicago Posts 1,799 Apr 18, 2012 #23 SMC or McMaster Carr. They both carry what you need. I used SMC last time and gotten about halh a dozen.
SMC or McMaster Carr. They both carry what you need. I used SMC last time and gotten about halh a dozen.
The Plc Kid Member Join Date Feb 2009 Location Macon, Georgia Posts 3,233 Apr 18, 2012 #24 VJTX said: where do you find 3/32 or 2.5mm slotted bits at? Click to expand... Grainger dude. http://www.grainger.com/Grainger/WERA-Hex-Screwdriver-Insert-Bit-5EPW3 http://www.grainger.com/Grainger/WERA-Hex-Screwdriver-Insert-Bit-5EPW9
VJTX said: where do you find 3/32 or 2.5mm slotted bits at? Click to expand... Grainger dude. http://www.grainger.com/Grainger/WERA-Hex-Screwdriver-Insert-Bit-5EPW3 http://www.grainger.com/Grainger/WERA-Hex-Screwdriver-Insert-Bit-5EPW9
sjohnson Lifetime Supporting Member Join Date Feb 2010 Location MI Posts 247 Apr 18, 2012 #25 I still Prefir these two Cordless Drill and Screwdriver Combo