hakko monitouch V606e

[gabarca]

Hi!
Hello, somebody can help with a cable for data transmission V6-CP for Hakko MONITOUCH V606e.
With cable V6-CP with connection:
RJ45-DB9 or DB25-Db9

Please...

 

[aslan]

Cut a standart Cat5 cable's one side;

Dsub 9 female side;

Brown: 2
Brown-white: 3
Blue-white: 5

You can use serial converter, connect via MJ1 ( some times MJ2 )port.

 

[gabarca]

hello aslan.

I did that you said but didnt work...
anything else?

 

[aslan]

First check your V-SFT settings.
Before upload or download you should change panel's mode;
First touch the 'System button' than touch the ' F1 button' now you will be in system menu.
Left down corner you should see: Editor=MJ1
Now you can upload or download. For cable check also this link.

http://www.plctalk.net/qanda/showthread.php?t=18375