ChuroChurp
Member
Hello,
I am currently using a Control Logix with RSLogix 5000 trying to communicate with my 1794-ASB(Has a power supply, adapter, 16 point input module and 2 8 point output modules in that order) RIO input / output discrete modules. I am able to download to the DHRIO with the scanner attached to the RIO 1794-ASB fine with no problems.
The problem occurs when I use the message instruction trying to get RSLogix5000 to read the status of my inputs on the RIO input cards. I set the message type to block transfer read. I set the number of elements to 0 so the software would assign the proper number of integers automatically. I made a tag to store the input data, called Input (this is a controller tag). This was 16 integers long (the input card I am trying to read has 16 input terminals).
Under the message configuration screen I browsed and selected the input module which was at group 0.
When I downloaded I received an error code of 16#00d0. Not quite sure what the problem is. Attached are screenshots of my message command set up and IO tree.
I am currently using a Control Logix with RSLogix 5000 trying to communicate with my 1794-ASB(Has a power supply, adapter, 16 point input module and 2 8 point output modules in that order) RIO input / output discrete modules. I am able to download to the DHRIO with the scanner attached to the RIO 1794-ASB fine with no problems.
The problem occurs when I use the message instruction trying to get RSLogix5000 to read the status of my inputs on the RIO input cards. I set the message type to block transfer read. I set the number of elements to 0 so the software would assign the proper number of integers automatically. I made a tag to store the input data, called Input (this is a controller tag). This was 16 integers long (the input card I am trying to read has 16 input terminals).
Under the message configuration screen I browsed and selected the input module which was at group 0.
When I downloaded I received an error code of 16#00d0. Not quite sure what the problem is. Attached are screenshots of my message command set up and IO tree.