HMI cabinet handles

controlled

Lifetime Supporting Member
C
Join Date
Nov 2005
Location
bowmanville
Posts
419
This isnt a PLC question, but i know there are alot of panel builders in this site.

A customer emailed me the attached picture so I can replace a damaged cainet handle. It appears to be a Hoffman panel, but I could not find anything on the Hoffman website that looks like the handle shown.

Has anyone seen this style of handle before?

Cabinet handle.jpg
 
I have two machines with similar panel setups, looks like they may be the same manufacturer (but a different size). I'm currently not at work so I can't look it up, but in about 11 hours I will be back there, and can see if there are any model numbers on them.
 

Similar Topics

V
Shihlin HMI
hi there, I'm a beginner pls help when transferring pc to hmi there's an error message on shihlin hmi written com1 station 1: communication...
Replies
1
Views
72
DarrylR
D
H
Mitsubishi FX3G PLC with Beijer HMI E615
Hello, I have a Mitsubishi FX3G 14M PLC and a E615 HMI from Mitsubishi/Beijer. I'm using GXWorks 2 to do the programming and I have no problem...
Replies
4
Views
149
NicoSz
N
B
Advantech TCP-1250H HMI upload/Download
Good people of PLCs.net, I am currently working with an HMI that is advantech 1250H, that communicates with a 1769 Compact logix and Currently...
Replies
2
Views
79
bdauliya
B
T
Is it bad to have multiple identical inputs on an HMI?
Hello all, I know its not good practice to have duplicate destructive bits when writing plc code, but I'm wondering about writing to the same tag...
Replies
2
Views
121
TheRooster
T
A
Trying to get copy of Red Lion G315 HMI program but support upload was not ticked.
Hi All, As a precaution my company has been collecting copies all the HMI and PLC programs. I have recorded copies of most of our sites...
Replies
0
Views
78
Angus_Fergusson
A
Back
Top Bottom