dbrsystems
Member
Hello all,
I have a 2706-P22R that is giving me a fit; it is a serial unit. We have it connected via a Nul-Modem cable to Ch0 of a 1769-L32E. I can use the cable to download and trigger messages from my Laptop, so, I'm assuming the cable is OK and the InView is configured properly.
I'm trying to use an AWT to send the "^V" string to insert a variable in to my message. I have the messages setup to receive 4 variables 0, 1, 2, 3.
When the AWT triggers, it finishes with no errors; DONE bit, No ERROR. But, no variable data on InView.
Here are a couple of shots.
Thanks in advance for any help.
Leo
I have a 2706-P22R that is giving me a fit; it is a serial unit. We have it connected via a Nul-Modem cable to Ch0 of a 1769-L32E. I can use the cable to download and trigger messages from my Laptop, so, I'm assuming the cable is OK and the InView is configured properly.
I'm trying to use an AWT to send the "^V" string to insert a variable in to my message. I have the messages setup to receive 4 variables 0, 1, 2, 3.
When the AWT triggers, it finishes with no errors; DONE bit, No ERROR. But, no variable data on InView.
Here are a couple of shots.
Thanks in advance for any help.
Leo
Last edited: