LG PLC K120s and Vijeo Citect

pratyathedon

Member
P
Join Date
Dec 2011
Location
MH
Posts
1
Hello sir,
I am using Vijeo Citect SCADA v7.20 and LG Master k 120S PLC.
Can anyone please tell me the procedure on how to configure the PLC in Citect SCADA in Detail.What setting i have to do in SCADA.Thank you.
 
Vijoe Citect support LG K500 and K1000 series through serial via computer link module. You have to go to project editor> communication > express wizard and create/reuse IO Server, create new IO device and then select th driver and then enter the PLC noe address.
 

Similar Topics

K
modbus communication in PLC k120s
hallo,, my name is Bima, I'm a student & now I'm studying modbus communication in PLC. I use the master-k120s from LG. I learn from the manual...
2
Replies
17
Views
8,634
kurobima
K
B
k120s ls plc with smart i/o
I would be very thankful if you help me with my problem in k120s lg plc , We have k120s with Rnet communication module and 3 smart i/o with ( 16...
Replies
3
Views
3,935
Lancie1
Lancie1
H
Mitsubishi FX3G PLC with Beijer HMI E615
Hello, I have a Mitsubishi FX3G 14M PLC and a E615 HMI from Mitsubishi/Beijer. I'm using GXWorks 2 to do the programming and I have no problem...
Replies
2
Views
30
hafizzz_ahmad
H
L
Beckhoff PLC and EDS
Hi, I'm trying to import a Rockwell/AB EDS to Beckhoff but I'm not sure how to import/install the EDS. It is a PowerFlex 525 EDS. Is there a way...
Replies
1
Views
64
busarider29
busarider29
R
Issue with mitsubushi melsec PLC modbus QJ71MT91
I want to communicate my Q series PLC with Factory IO using GX works 2 software, I want to use modbus as server and the ips are as follows plc...
Replies
0
Views
44
raheelredben
R
Back
Top Bottom