Hi, I hope everyone's week is going great.
I have ADAM-6217 Analogue module which supports Modbus TCP and I am trying to get the AI values of the temperature sensor connected to Channel 0 of the Adam module.
I am new to the M340 programming and trying to get my head around the memory addressing scheme and communications with external devices.
I have already tried the following two methods but it doesn't seem to work.
http://www.plctalk.net/qanda/showthread.php?t=127057&highlight=m340+modbus and
https://www.youtube.com/watch?v=QhkIQCOyxjo
Please have a look at the attached screenshots.
I have tried the ADDM block with different addressing schemes, e.g., 'Ethernet_1{84.26.17.150}TCP.MBS', '0.0.3{84.26.17.150}TCP.MBS', '0.0.3{84.26.17.150}' and 'Ethernet_1{84.26.17.150}'
Can someone please tell me what should be the values of the READ_VAR parameters in order for me to read 40001 address from the adam 6217?
The details are below:
M340 PLC -- > IP: 84:26.17.167
Adam 6217:
IP: 84.26.17.150,
Address to be read: 40001
I have ADAM-6217 Analogue module which supports Modbus TCP and I am trying to get the AI values of the temperature sensor connected to Channel 0 of the Adam module.
I am new to the M340 programming and trying to get my head around the memory addressing scheme and communications with external devices.
I have already tried the following two methods but it doesn't seem to work.
http://www.plctalk.net/qanda/showthread.php?t=127057&highlight=m340+modbus and
https://www.youtube.com/watch?v=QhkIQCOyxjo
Please have a look at the attached screenshots.
I have tried the ADDM block with different addressing schemes, e.g., 'Ethernet_1{84.26.17.150}TCP.MBS', '0.0.3{84.26.17.150}TCP.MBS', '0.0.3{84.26.17.150}' and 'Ethernet_1{84.26.17.150}'
Can someone please tell me what should be the values of the READ_VAR parameters in order for me to read 40001 address from the adam 6217?
The details are below:
M340 PLC -- > IP: 84:26.17.167
Adam 6217:
IP: 84.26.17.150,
Address to be read: 40001