Mitsubishi E1032 HMI Advice

[renrutp76]

Hi just joined for a little advice..... I have an E1032 HMI, the screen is totally dead, not sure what the PLC is (working from photos). Beijer still supply the E1032, but the E-Designer software is no longer available, although I can get a demo version. My questions are:-

1. Can the demo version be used to extract the project from the damaged HMI (provided it is only the screen that is damaged).

2. If so how....?

Thanks

Paul

 

[gclshortt]

http://www.plctalk.net/qanda/showthread.php?t=87773

I think the above thread should help you out. Demo cannot extract the project.
Regards,

 

[gclshortt]

http://www.plctalk.net/qanda/showthread.php?t=87773

I think the above thread should help you out. Demo cannot extract the project.
Regards,

 

[paraffin power]

E designer is absolutely still available. Beijer Uk can supply it and a replacement E1032.