Modbus data not accurate

Bullzi said:
How do you get the screenshots to actually get into the body of the post??
Click to expand...
There's some extra work; the graphic has to be posted on a public site. I use www.postimage.org. It provides a link to the graphic.

Direct_Link_on_postimage_org_hi.jpg


The_PLCsdot_Net_reply_dialog_box_hi.jpg


Click on the yellow "insert image" button (highlighted in red, above). The Enter URL box appears.

enter_URL.jpg


Paste the "Direct Link" URL and the image appears.
 

Similar Topics

E
Modbus serial data from multiple devices to M340 controller
I have 9 field devices, three METSEPM5110 power meters and six ACE949-2 rs285 interface modules. I want to read this Modbus rtu data through rs485...
Replies
8
Views
325
Enggshab
E
C
Modbus Data FROM Webpage HTML
Hey all, I am trying to find a way to get data from a local device webpage into a modbus server for a customers SCADA. The customer was hoping...
Replies
3
Views
449
drbitboy
drbitboy
F
Beckhoff: Questions about Data Types for Modbus?
I am using a Beckhoff PLC and trying to convert a REAL to 2 WORDS to send over Modbus. Does anyone know how to do this? Also how would I convert...
Replies
5
Views
822
g.mccormick
G
I
problem on Controllogix to send/read Modbus TCP data & using TCP-ASCII bridge
I am working on a project, inside an AB CLX, I implemented the Modbus TCP Client AOI published on AB website, to interreact with a Modbus ASCII...
Replies
7
Views
3,593
TheWaterboy
TheWaterboy
S
Grabbing data over Modbus TCP from Scadapack 350 to m340 problems
I've got 16-bit data at address 40200 on a Schneider Scapack 350. I can grab the data over Modbus TCP using Kepware at IP 172.16.1.100. When I...
Replies
8
Views
2,510
sevun
S
Back
Top Bottom