Motion control by RSLogix5000,Compactlogix 5370 L3 Controller & 2097-V31PR2-LM Drive

minaykha

Member
M
Join Date
Apr 2009
Location
singapore
Posts
96
Motion control by RSLogix5000,Compactlogix 5370 L3 Controller & 2097-V31PR2-LM Drive

Hello!

I would like to study the Motion control by using RsLogix 5000 software, Compactlogix 5370 L3 controller( 1769-L36ERM ) and 2097-V31PR2-LM Servo Drive.

Can anyone provide study sources such as Manual, website or tutorial link so that i can understand the basic concept of motion control , programming and configuration etc...

With Thanks,,
 

Similar Topics

recondaddy
RSLogix5000 Motion Control - Full Rotation
Hey everybody, I've been working with process and packaging for years, but I'm fairly new to motion control, and would like some quick advice on...
Replies
3
Views
3,805
dmargineau
D
S
How to start with Motion Control on RSlogix5000
Hi Guys, Try to learn Motion control for RSLogix5000, where should I start from? I am reading the MotionInstruction now. And one more question...
Replies
0
Views
3,408
soda
S
T
motion control using RSlogix5000
I could not get a PC (process complete) bit to turn on after a MAM command. This only happens on one of the many MAM commands on the same axis...
Replies
3
Views
3,474
Peter Nachtwey
Peter Nachtwey
T
motion control using RSlogix5000
I have trouble to get a Process Complete bit to turn on after a MAM. This only happens on one of the many MAM commands on the same axis. Could...
Replies
0
Views
1,677
tj5nguyen
T
H
Motion control use torque loop in Rockwell Studio 5000
I have always controlled servos in Rockwell motion using position loop. I have an application where one process will push against a servo...
Replies
3
Views
273
robertmee
R
Back
Top Bottom