wu xiangming
Member
Differ model's PLC aim at Differ Profibus communications for both the CPUs . can select S7 connect or master/slave communications.
No Communication in same type of Models of S7-300 and PC
- Thread starter Utco
- Start date
I am not getting Both CPUs which address should be unique?
Because one CPU is giving the same error by LED BF1 and LED SF.
I can download program from second CPU through profibus on first PLC.
I can see program by Monitoring 1st PLC through 2nd PLC.
How to troubleshoot this Profibus Fault?
Because one CPU is giving the same error by LED BF1 and LED SF.
I can download program from second CPU through profibus on first PLC.
I can see program by Monitoring 1st PLC through 2nd PLC.
How to troubleshoot this Profibus Fault?
Last edited:
Similar Topics
HOW TO COMMUNICATE BETWEEN 2 ''EN2T'' MODULES MOUNTED ON THE SAME ALLEN BRADLEY CONTROLLOGIX CHASSIS. BUT TWO EN2T HAS DIFFERENT NETWORK. ONE EN2T...
Hi folks,
I have a Controllogix in communication with a zigbee coordinator using Logix AIO for modbus tcp. This zigbee coordinator have 3 slaves...
Hello, i am using profibus as communication between plc and fanuc arm. I can easily send inputs from plc to arm, but i can't monitor any outputs...
I have Woodward Controller EASYGEN-3500XT and Phoenixcontact make IO CAN-CUPLER part no: 2702230, Analog Input card: 2861412, Analog Output Card ...
Hello Everyone,
I have a issue with communication between two different PLCs. So here is the facts, The Master PLC is Guard Logix 5069 with IP...
