No data is showing in WinCC

arocon

Member
A
Join Date
Oct 2006
Location
Dubai
Posts
171
No data is showing in WinCC But S7 is showing healthy. CP5611 card has been replaced. Could you suggest what is the problem & how to progress?
 

Similar Topics

J
Showing Data logging win winCC 2008
Hi Is it possible to show data logged data in winCC with a PC RT? I can make it work with alarm logs. By using an Alarm view, and enabling the...
Replies
5
Views
8,689
JesperMP
JesperMP
V
omron CX supervisor showing DATA LOCATION is invalid for this type of point
hi , i'm using CX supervisor and while assigning an input/output value to a tag its showing that DATA location is invalid for this type of...
Replies
1
Views
3,031
lostcontrol
L
A
WinCC C-script Raw data operation.
Hello. I have a db which is 1000 INT, and this db is represented in WinCC as a raw data type set of 5x 400 Bytes. This set is read with a script...
Replies
0
Views
21
AdamF
A
K
Need Help Modifying Citect Scada Historical Trend Variable Data
So i've been at this for a long while, i have Citect Scada 2018, i have full access to everything but i can't seem to find any option or...
Replies
0
Views
47
kreamsippycup
K
A
reading data from siemens controller (profinet) to ethernet/IP controller
Hello I have a s7-1200 and I would like to read the tags present in this controller with my controllogix controller. The two controllers don't use...
Replies
5
Views
159
bkottaras
B
Back
Top Bottom