lee enfield
Member
hi all,
how can i upload the program from omron C40P PLC to computer. it is an old model.
how can i upload the program from omron C40P PLC to computer. it is an old model.
Omron C40P Uploading Program
- Thread starter lee enfield
- Start date
gtsuport
Member
This will require Syswin software and a Host Link unit.
I think the Host Link would be 3G2C7-LK201.
Both the software and Host Link are obsolete.
Good Luck with your project.
I think the Host Link would be 3G2C7-LK201.
Both the software and Host Link are obsolete.
Good Luck with your project.
Similar Topics
omron plc sysmac c40p alarm and power led lit continously doesnot go in run mode please give me solution on it:lolis:
hi,
I have an alarm in my sysmac C40P type PLC(old type) - Any possiblity to settle this? - alarm blinking
Before buy new plc or upgradation...
Good morning everyone I’m currently working on a omron device net and have a nord drive that fell off the network. I have limit knowledge in...
I've come across a system running omeron cx-programmer version 9.42. Am I going to need to find a legacy version of the software to edit and...
Has anyone done SMS messaging from an Omron CJ2J-CPU31 PLC? If so could you help please. Omron here in Oz have not had any experience doing this...