opinion needed

ganutenator

Lifetime Supporting Member
Join Date
May 2002
Location
kansas
Posts
1,440
It is rare that I ask for opinions. But here goes.
Currently using a low cost NUC for an hmi.
Looking for a low cost NUC or similar.
thoughts
 

Similar Topics

Hello gents, Although I'm looking to get a new job elsewhere, I'm still working in this company and may be put on the spot with something and...
Replies
18
Views
5,049
Hi all! I have to establish communication in a network with 9 nodes of S7-1200 and PC running WinCC Advanced. Each node has S7-1200 with local...
Replies
8
Views
4,391
i have an issue regarding Analog input card Right now i have a system an old system of Siemens (S5-150CPU) with 460-4UA11 anlaog input modules...
Replies
7
Views
5,013
Hi all, Just looking for an opinion on small Yamaha robots - pick-and-place type. Most likely we will be integrating them into some projects and I...
Replies
11
Views
6,218
I'm looking forward Iconics. I had previously extensive experience with Citect and little bit less experience with Wonderware. Pros and cons with...
Replies
0
Views
851
Back
Top Bottom