chanal
Member
ok...ran program on conveyor at school today and worked fine...
small part ..... lite
medium part ..... lite
large part ...... lite
now when a part comes through on the conveyor that is "out of range" it is considered scrap and i should have ALL THREE lights not only on but also flashing.
PROBLEM:
lites are on but they ARE NOT FLASHING! its weird... im sure not understanding why my T4:1 data table has a 7 in it...when im asking it to flash off and on for only 1 second.
BUT THEY ARE NOT EVEN FLASHING...i can see the highlights as the program is running but it seems to be running through the process but no actuating it...
small part ..... lite
medium part ..... lite
large part ...... lite
now when a part comes through on the conveyor that is "out of range" it is considered scrap and i should have ALL THREE lights not only on but also flashing.
PROBLEM:
lites are on but they ARE NOT FLASHING! its weird... im sure not understanding why my T4:1 data table has a 7 in it...when im asking it to flash off and on for only 1 second.
BUT THEY ARE NOT EVEN FLASHING...i can see the highlights as the program is running but it seems to be running through the process but no actuating it...