plc to plc communication set up(hardware)

gmn

Member
G
Join Date
Sep 2011
Location
phil
Posts
7
Good evening............
Need some help hir...
just some kinda confuse in connecting/linking 2 mitsubishi PLC series A using the computer link module (through rs485) installed on each plc.
Just wanna see the right hardware setup in connecting these 2 plc with one working station(PC).. what is the right setup connection on this type of PLC?????????o_O
 
tnx a lot!!
but I already did that before..but still can't find an answer..

anyway, tnx again
 

Similar Topics

A
communication between two siemens plc's with different ip address
i have two plc 1. s7-1212dc/dc/dc ip; 192.168.0.1 2. s7-1500 1513-1pn ip; 192.168.3.2 i need to get data from plc1 to plc2. any idea how to do...
Replies
5
Views
133
mk42
M
A
WinCC Unified and PLC weird communication issue
I have created a project in TIA Portal v16 Upd6 with S7-1200 (6ES7214-1AG40-0XB0) and WinCC Unified (PC station). The communication between the...
Replies
4
Views
154
mk42
M
H
No communication with PLC 90-70
Hello We have installed several G.E. Fanuc 90 70 PLC Everything was ok but suddenly we can not communicate anymore with any PLC with the software...
Replies
0
Views
81
Hazatov
H
Voltimus
IDEC PLC to PLC modbus communication
Apologies for not being the best IDEC programmer. I recently was doing some inspections on a site that had 3 FC6A IDEC processors. The issue is...
Replies
0
Views
94
Voltimus
Voltimus
Y
Communication between Delta plc DVP12SA2 and Arduino using MAX 485 module.
I'm trying to write a data in Arduino using MODWR function block .I used the code I got from online for both PLC and Arduino. I made the wiring...
Replies
4
Views
133
yawin
Y
Back
Top Bottom