Read real data from hmi to plc

Lee sung

Member
L
Join Date
Mar 2024
Location
Assam
Posts
1
Hi
Iam using monitouch hmi(V9 soft) with omron plc cj2m (CX programmer).
In this I want to read a data from hmi to plc.
The data was like temperature.the temperature was directly read from temperature controller to Hmi .
So I need that data in plc from hmi.
 

Similar Topics

P
Read real time - Mitsubishi Q series
Hi all, I have an issue with read time of Q-PLC. In case of FX is possible to read time, day, year... via D registers (D8013-D8019). In case of...
Replies
2
Views
2,875
putiss
P
T
Mitsubishi Q-series, read an analog laser sensor in real time
Hello. I've been learning about PLC's in a few months now, mainly PLC programming, and yesterday I got an assignment to read an analog laser...
Replies
3
Views
4,603
artmierz
A
G
How Do I Read a REAL as a SINT
Folks I have a bit of a dilema here. On a profibus network, Prosoft on ControlLogix Platform, I have an instrument that is giving me two values...
Replies
3
Views
1,362
chavak
chavak
B
Twincat .NET read float/REAL values
Hey all, We're trying to read values from a Beckhoff PLC that is programmed by a third party. We see in the PLC the value...
Replies
1
Views
3,385
RocketTester
R
H
S7 how to read real time pulse
Hi all on s7 318 I havn to read a pulse from a laser senser which gives 0 output. when on. I have used a optocoupler relay to chang it to 24 v dc...
Replies
4
Views
2,929
harrydeharry
H
Back
Top Bottom