No. I'm only using 4-8 bytes each PLC for digital, and about 64 bytes for real numbers in 4 byte chunks.
Those are the gaps (unused memory). I guess 16383 is the max address.
S7-1200 I-Device Fault - Area length error...
- Thread starter keithkyll
- Start date
Those are the gaps (unused memory). I guess 16383 is the max address.
Similar Topics
Hello all,
I am working on a project utilizing an s7-1200 cpu and Tia Portal v17. I currently have an external PCB with some sensors on it (and...
What is the best practice way to make remote procedure calls from a Siemens s7-1200 PLC to a C# app running on a PC (app is directly controlling...
Hello everyone, i had a recent project that i was working on before. Now since i didnt have any PLC's before i used to practice and chose the...
Hi everyone, trying to get data out of a digital encoder that is little endian into my Siemens S7-1200 controller that is big endian...it's an...
How to check the communication between the Micrologix1200 to Citect SCADA. I use PLX51-DF1-ENI router to communicate in scada.
I tried to use...