CKevinWilliamson
Member
I have a S7 1500 PLC Firmware Version 1.0.1. The Ethernet port will not stay connected to Portal Version 12 SP 4 more than about 45 seconds.
The display on the front of the PLC will show "Connecting" The PC will announce the port is connected. Portal V12 will communicate. Meanwhile the PLC front panel displays "Stop" all communications are Ok during this. After about 45 seconds the PLC front panel displays "fault" At this time all communications stop and the PC announces the cable has been unplugged. WHAT am I doing wrong??? Please help.
The display on the front of the PLC will show "Connecting" The PC will announce the port is connected. Portal V12 will communicate. Meanwhile the PLC front panel displays "Stop" all communications are Ok during this. After about 45 seconds the PLC front panel displays "fault" At this time all communications stop and the PC announces the cable has been unplugged. WHAT am I doing wrong??? Please help.