s7314ifm

[alexmcsheffrey]

Hi i have a s7 314ifm with some of the built in analogue inputs faulty.i want to put a analogue module on the end and change over the addrress in program,i have uploaded the program but as i am not familiar with siemens i do not know what the original adrresses will be, can anybody tell me what they would be??

 

[mohamedzobaa]

Try to go to HW Configuration and click on your Analogue card then you will know the address for more details give me your hardware nd siemens part no. and i will give you the address

 

[alexmcsheffrey]

had a look in the hardware and it says I address 124...155? part number is 6es7 314-5ae03-0ab0

Cheers

 

[L D[AR2P#0.0]]

When you insert the new analogue module it will be given addresses - see screen shot.

 

[alexmcsheffrey]

Thanks for that, as i said not used to siemens can you tell me what the onboard ai addresses would be??

 

[L D[AR2P#0.0]]

As below:

 

[alexmcsheffrey]

thanks for that so just to check in the program i have

PIW128 PIW130 PIW132 PIW134 theese are my 4x onboard Ai?

Alex

 

[L D[AR2P#0.0]]

..