nightline
Member
Gents,
I've an Allen Bradley Stratix 5700 full firmware managed switch and need configure some kind of NAT but don't know how to fix this.
This is what is needed:
The CPU is connected to port 18 and has 192.168.1.9
The Switch has address 192.168.1.80
Port 1 is connected to the public plant network in the range 10.168.160.XXX
I want the public network to connect only to the CPU.
How can I do this?
Thanks in advance!
I've an Allen Bradley Stratix 5700 full firmware managed switch and need configure some kind of NAT but don't know how to fix this.
This is what is needed:
The CPU is connected to port 18 and has 192.168.1.9
The Switch has address 192.168.1.80
Port 1 is connected to the public plant network in the range 10.168.160.XXX
I want the public network to connect only to the CPU.
How can I do this?
Thanks in advance!