Hi,
I have a system who is built up with 400H and Intouch HMI (two IO servers, two physical computers).
I have some problem with the redundancy, if I`m diconnect the ethernet cable on master CPU intouch switch over and start pooling data from the other CPU on the 400H system, but the challenge is if I set the CPU to stop then the intouch dont switch over...
Summary:
Intouch don`t detect that the CPU is in STOP...
Somebody have any articles etc, how to configurate Intouch the right way when its communite with a 400H system?
I have a system who is built up with 400H and Intouch HMI (two IO servers, two physical computers).
I have some problem with the redundancy, if I`m diconnect the ethernet cable on master CPU intouch switch over and start pooling data from the other CPU on the 400H system, but the challenge is if I set the CPU to stop then the intouch dont switch over...
Summary:
Intouch don`t detect that the CPU is in STOP...
Somebody have any articles etc, how to configurate Intouch the right way when its communite with a 400H system?