Siemens .pdb file.

[hecva95]

Help converting .dbp file

Please, some of you guys could help me to converte this dbp file to a newer version of WINCC FLEXIBLE 2008 like sp3 or newer, thank you


https://docs.google.com/document/d/...ouid=106904362514485987927&rtpof=true&sd=true

 

[PLC]

You willing to pay?

 

[hecva95]

Help to converte pdb from protool to WinCC flexible sp3

Hi,

here is converted to wincc flexible sp3.
https://mega.nz/file/TD5lCaqT#9gn03oOLQGLJ51aVUS2VzV6scUwg_D_2GfpTluH4gKE

Regards.

could you help me too? I will thank you so much, I can not download protool and I really need to convert the file.

https://docs.google.com/document/d/...ouid=106904362514485987927&rtpof=true&sd=true

 

[Konstantinos Egk]

Hello i am facing a huge problem like yours. I have a battery lose on a plc , so i lost some hmi settings. The factory had an old pdb file but i am not able to open it on Tia portal. Can anyone help me convert it to tia protal?






Thank you a lot!

 

[JesperMP]

Hi Konstantinos.

PLC variables that are set on the HMI will not be saved in the HMI. Exception is recipe data that can be saved on the HMI.
Normally the HMI should not be affected by the PLC losing the backup battery, so recipes stored on the HMI will be retained.

So it does not make sense to migrate the HMI because the PLC lost battery power.

 

[JesperMP]

Oh, in case you think that the lost settings of the PLC variables are stored in the .pdb file.
They are not.