Siemens S120 drive to control Lenze servomotor

[Kataeb]

Kindly, has anyone tried to control Lenze servomotors with Siemens S120 drives ? Any special hints ? Have some concerns for the resolver and servo parameters . . .

Siemens CU310-2 PN 6SL3040-1LA01-0AA0 , Siemens PM240-2 6SL3210-1PE31-1AL0
Lenze motor MDFQARS112-22 with resolver IDNR00397002 , Lenze motor GFQBT112-24 with resolver IDNR00397002 (installed on or inside the motor)

 

[JRW]

Post the specs on those two motors

 

[baref00t25]

A quick search and I wasn't able to find the motor or resolver specs. I have use the Siemens S120 to control other resolver based servos that have long been obsolete. For a resolve you will need a Simens SMC20 module, 6SL3055-0AA00-5AA3. I just needed the specs for the motor and I was able to enter there into the S120.

 

[Kataeb]

Kindly, check data of servomotor.

MDFQA

www.lenze.com

MDFQA asynchronous servo motors

https://www.lenze-com.ru/content/files/MCA-MCS-MQA-MDxKS-MDFQA__Servo%20motors__v3-0__EN.pdf

Operating Instructions

 

[JRW]

I would compare these to a Siemens 1PH7/8 motor

I dont think you would have any problem running these Lenze motors

Yours is asynchronous, thats why I believe it will work fine



Just be sure to get the correct SMC for the encoder

 

[L D[AR2P#0.0]]

For a resolver you need an SMC10 module, not SMC20