siemens software installation in 64bit processor XP

[sibi05.aat]

Hi,

I bought XP 64 bit Processor laptop.Can i install all siemens software like simatic manager, wincc flexible, wincc and E-Plan package software into 64bit processor??

If not please give solution to install into 64bit processor.


Thanks in advance..

sibichakravarthi

 

[Saperov]

http://support.automation.siemens.com/WW/view/en/51774795

STEP 7 Professional 2010 SR1
After the release of SR1 (planned for August 2011), this package, in addition to a License Key for STEP 7 Professional 2010, will contain the Upgrade License Key to STEP 7 Professional V11, plus the following data carriers:

• DVD STEP 7 Professional V11 SP1
• DVD STEP 7 Professional 2010 SR1

STEP 7 V5.5 SP1 can be used with the following operating systems:
· MS Windows XP Professional SP2 or SP3
· MS Windows Server 2003 R2 SP2 Standard Edition as workstation computer
· MS Windows 7 32 Bit Ultimate, Professional Enterprise (standard installation), with or without SP1. The Windows XP mode under Windows 7 has not been approved yet.
· New as of this SP: MS Windows 7 64-bit Ultimate, Professional and Enterprise, with or without SP1.
· New as of this SP: MS Windows Server 2008 R2 (64-bit), with or without SP1.
STEP 7 has not been tested on any other operating systems; use at your own risk.

it wokr at 64-bit Home edition (after quoting ; in setup.ini)


wait WinCC 7.0 SP3 - possible it also will be 64-bit
about WinCCFlexible - no info.

 

[xzen]

64 bit WinCC flexible

Talked with Siemens today. They promise WinCC flexible SP3 before 2012.