Siemens TD300 Text Display

ABTech

Member
A
Join Date
Oct 2006
Location
Bridgend
Posts
30
Hi all.

I am trying to find some information on a Siemens TD300 text display.

It was originally connected to a S5 PLC and I have just converted the program over to S7-200. I am now trying to find out how you would go about programing the TD300 so I can try and get some information from it about how the messages were displayed.

Any help with this would be appreciated.

Best Regards

Jonathan
 

Similar Topics

P
SOFTWARE TIA PORTAL V14 - PLC SIEMENS
Hello, good morning, I have been having two problems with the Tia Portal software. The first is that I have installed it on my computer and...
Replies
1
Views
44
mk42
M
M
CodeSys - alternative to Siemens DB
Hello to all, I'm just starting with using CodeSys. Immediately, I have noticed that Codesys doesn't use data blocks like for example S7 does...
Replies
11
Views
127
dwoodlock
dwoodlock
R
Modbus Master Siemens S7-300 - OB35?
Hi, I'm setting up a modbus master on an S7-300. It seems to work in OB1 but not when I use it in OB35. Does anyone have any ideas why? Could...
Replies
10
Views
104
Lare
L
S
Siemens PLC Main Disconnect Trip
The past week we received a new piece of equipment from Germany which utilizes siemens controls. Typically in our company we use A.B. controls for...
Replies
12
Views
328
JesperMP
JesperMP
A
reading data from siemens controller (profinet) to ethernet/IP controller
Hello I have a s7-1200 and I would like to read the tags present in this controller with my controllogix controller. The two controllers don't use...
Replies
5
Views
173
bkottaras
B
Back
Top Bottom