I am using tht module and facing a strange problem. When i turn on the PLC and load the logic the ACTIVE LED of the 2752 keep blinking even after i run the PLC.
But once I took out the module while the PLC was powered on and then put the module back in again, load the logic and run the PLC that LED was constantly lit.
Anyone knows what could be the problem .. ? The ladder file works fine and the module works too but wihout pulling it out of the rack and inserting back in while the PLC is on. it just dont work
Thanks for the reply in adv.
Atif
But once I took out the module while the PLC was powered on and then put the module back in again, load the logic and run the PLC that LED was constantly lit.
Anyone knows what could be the problem .. ? The ladder file works fine and the module works too but wihout pulling it out of the rack and inserting back in while the PLC is on. it just dont work
Thanks for the reply in adv.
Atif