Autofabian
Member
any advise how to integrate a Px4i Printer with a SLC 5/04. The current Rs232 port in the PLC is use to communicate to a Pro-fase HMI.....anybody have done that???.....
SLC 5/04 and a PX4i Printer from Itermec
- Thread starter Autofabian
- Start date
Similar Topics
I’m attempting to send a temperature from a SLC-5/02 to an EZiMarquee display. The vendor said to use a MSG instruction to send the data to the...
Hello all. I have a few SLCs in my plant and of late we've seen a weird issue: The system will be running normally and then randomly the outputs...
I am working on setting up a Prosoft Datalogger model PLX51-DLplus-232. This unit will be collecting data from a SLC 5/05 on the DB9 port set to...
I have a redundant ControlLogix being set up. This program reads a value from a remote site which happens to be SLC PLC. Rockwell mentions SLC...
Hello, I have a ControlLogix redundant controller being set up. The program reads a value from a remote site which hosts a SLC PLC. Rockwell...