Hi I am new to this Allen Bradley system as I just was able to connect to the system a week ago. where I work at doesn't really have any training so after I try to fix the things we have I plan on doing some training on my own. Anyway the last problem I have a good CPU but have an error message that won't go away. The error is
Fault Routine S:29=0
Major Error S:6=194h
" in the REM Run or Test mode the module in Slot 1 has been detected as being inserted under power. This can also mean that the module has reset itself"
I go to clear it and after I clear it goes to remote program mode and when I go to put it run the fault comes back. I tried to replace the slot one card with a known good one but to no avail.
any help would be appreciated thanks
Fault Routine S:29=0
Major Error S:6=194h
" in the REM Run or Test mode the module in Slot 1 has been detected as being inserted under power. This can also mean that the module has reset itself"
I go to clear it and after I clear it goes to remote program mode and when I go to put it run the fault comes back. I tried to replace the slot one card with a known good one but to no avail.
any help would be appreciated thanks
Last edited: