STL code to Ladder

[cottagewood]

Hi people, could any one tell me if i have converted this STL code correctly


A M 30.7
O M 31.0
A M 105.7
O(
A M 30.4
AN M 30.6
)
O(
A M 30.4
A M 30.6
A M 40.6
)
A I 8.7
A I 8.6
A I 10.1
AN I 17.0
A I 12.5
A I 19.1
= Q 21.0

TIA

 

[Rob...]

Looks ok to me.

 

[gclshortt]

Looks good

 

[cottagewood]

Thanks guys,
STL was the 1st language I ever used but it was about 35 years ago and I'm a bit rusty, I used ladder mostly since then, but I'm getting quite attached to ST these days.